16TAKEOFF TOURDirect-To NavigationThe 400W-series unit can use direct point-to-pointnavigation to guide you from takeoff to touchdown,even in the IFR environment. Once a destinationis selected, the unit will provide speed, course anddistance data based upon a direct course from yourpresent position to your destination. A destination canbe selected from any page with the direct-to key.“Activate?”Function FieldSelect Direct-To Waypoint PageDestinationWaypoint IdentifierFieldTo select a direct-to destination:1. Press the direct-to key. The Select Direct-ToWaypoint page will appear with the destinationfield highlighted. The direct-to waypoint mayalso be selected by facility or city name. SeeSection 3 for more information.2. Turn the small right knob to enter the firstletter of the destination waypoint identifier. Thedestination waypoint may be an airport, VOR,NDB, intersection or user waypoint, as long asit is in the database or stored in memory as auser waypoint.3. Turn the large right knob to the right to movethe cursor to the next character position.4. Repeat steps 2 and 3 to spell out the rest ofthe waypoint identifier.5. Press ENT to confirm the identifier. The “Acti-vate?” function field will be highlighted.Confirm the selected direct-to destination byhighlighting “Activate?” and pressing ENT.6. Press ENT to activate a direct-to course to theselected destination.Once a direct-to destination is selected,press and hold CLR to display the defaultNAV page.You can then press and hold the CLR key toreturn to the default NAV page, as desired.Direct-To Navigation
