Garmin GPSMAP 185 Sounder Owner's Manual

Also see for GPSMAP 185 Sounder: Owner's manual and reffarence Owner's manual Specification Owner's manual and reference guide

6GETTING STARTEDUsing the GOTO KeyA BTo mark your present position:1. Press the M key. The mark position page will appear, with a default three-digitwaypoint name, symbol, position, and depth (at this position).2. Use the R keypad to highlight the waypoint name field (001) and press T.3. Press the LEFT ARROW of the R keypad to clear the name field.4. Use the R keypad to enter the name ëDOCKí, using the UP and DOWN arrows to selecteach letter, and the RIGHT arrow key to advance to the next character position. If youmake a mistake and select an incorrect character, simply use the LEFT arrow key of theR keypad to backspace the cursor and correct the entry.5. Press T to confirm the name.6. The field highlight will advance to the symbol field. Press T to access the waypointsymbol page.7. Use the R keypad to highlight the ANCHOR symbol.8. Press T to confirm the symbol.9. Press T again to confirm the ëDONE?í prompt and save the waypoint.The waypoint is now stored in memory. Note that waypoints may also be creat-ed graphically from the map display, by manually entering position coordinates,or as underwater waypoints from the sounder page. Each of these techniques isdescribed in the reference section of the manual and/or on your GPSMAP 185Sounder quick reference guide. To continue our tour, letís move on to thesounder page.GETTING STARTEDMarking A Positionss The mark position page will automaticallyassign a default three-digit name for eachwaypoint, which can be changed at any timeto an alphanumeric name containing up tosix-characters.B. A complete set of waypoint symbols allowsyou to mark inland and offshore waypointswith a custom icon for fast waypoint recogni-tion.