Garmin GPSMAP 185 Sounder Owner's Manual

Also see for GPSMAP 185 Sounder: Owner's manual and reffarence Owner's manual Specification Owner's manual and reference guide

Once the cursor is over the TOUR3 waypoint, youíll notice that the waypointsymbol and name will become highlighted. The data field at the top of the pagewill display the waypoint name, the range and bearing from your present position,and the coordinates for the waypoint.To review the waypoint page for a selected waypoint:1. Press the T key.2. To return to the map page, press T again.The cursor can also be used to create new waypoints right from the mapdisplay.To create a new waypoint using the cursor:1. Use the R keypad to move the cursor as close as possible to the following position:N 35∫ 02.129í; W 076∫ 26.106í (Use the data window to verify the cursor position.)2. Press the T key to capture the cursor position.3. Use the R key to highlight the waypoint symbol field.4. Press T to access the symbol page.5. Press the DOWN arrow of the R keypad twice to select the wreck symbol.6. Press T to confirm, and T again to finish.14GETTING STARTEDReviewing and Creating Waypointson the MapA BA. Waypoints can be created from the map displayby moving the cursor to the desired positionand pressing the EDIT/ENTER key.B. The create new waypoint page will automatical-ly assign the next available three-digit numberas the default waypoint name. If you are creat-ing a waypoint at an on-screen navaid, thenavaid icon and name will be used as thedefault symbol and comment.