34Basic OperationTo change the other waypoint elements:1. Highlight the desired field and press ENTER/MARK.2. Use the ARROW KEYPAD to edit/enter the data. Press ENTER/MARK when done.On the Waypoint Review and Waypoint Edit Pages, you may also delete the selected waypoint, viewthe waypoint on the map, and move the waypoint on the map.To delete a waypoint:1. On the Waypoint Review/Waypoint Edit Page, use the ARROW KEYPAD to highlight ‘Delete’ andpress ENTER/MARK. With ‘OK’ highlighted, press ENTER/MARK again to confirm the deletion.To view the waypoint on the map:1. From the Waypoint Review/Waypoint Edit Page, highlight ‘Show Map’.2. Press ENTER/MARK. The waypoint is highlighted on a map with an information window at the topthat shows the waypoint name, position and distance and bearing from your current position.On the ‘Show Map’ map display, two additional options are available by pressing MENU:Measure Distance – allows you to measure the distance and bearing between two points on the map(see the “Points” section of the “Main Menu” chapter for more information).Point to on Main Map – returns to the highlighted waypoint on the Map Page (exits the WaypointReview/Waypoint Edit Page).Using WaypointsWaypoint Review PageWaypoint Edit Page
