70Main MenuUsing the Alarms TabThe Alarms Tab of the Main Menu allows you to define alarm settings.To access the Alarms Tab of the Main Menu:1. Press MENU twice to open the Main Menu.2. Highlight ‘Alarms’ from the vertical list of tabs using the ARROW KEYPAD.To set an alarm:1. Press MENU twice to open the Main Menu.2. Use the ARROW KEYPAD to open the Alarms Tab.3. Use the ARROW KEYPAD to highlight the field to the right of the alarm name you wish activate andpress ENTER/MARK.4. Change the mode to ‘On’ (Dist or Time for the ‘Arrival’ alarm) and press ENTER/MARK.5. Highlight the next field to the right and press ENTER/MARK, then enter the desired settings and pressENTER/MARK to finish.When an alarm goes off, the alarm message appears on the display and the unit emits five (5) beeps.When you select an alarm to be persistent, the alarm message appears on the display and the unit beepsuntil you press ENTER/MARK to acknowledge the alarm.To set a persistent alarm:1. Press MENU twice to open the Main Menu.2. Use the ARROW KEYPAD to open the Alarms Tab.3. Use the ARROW KEYPAD to highlight the box next to the alarm you would like to make persistent(for example, ‘Anchor Drag’).4. Press ENTER/MARK to place a check mark in the ‘Persist’ box. When an alarm goes off, it soundsuntil you acknowledge the alarm message by pressing ENTER/MARK.Alarms TabAlarms Tab: ‘Nav’ tab