37Basic OperationTo delete waypoints by distance:1. From the ‘User’ tab, highlight the waypoint to be deleted and press MENU.2. Highlight ‘Delete By Distance’ and press ENTER/MARK.3. Select ‘Less Than’ or ‘More Than’ and enter the desired distance using the ARROW KEYPAD.4. If desired, you can select a waypoint or point of interest as the ‘From’ location. Highlight the ‘From’fi eld and press ENTER/MARK. From the Find Menu, select the desired location and press ENTER/MARK. When ‘OK’ is highlighted, press ENTER/MARK.5. Highlight ‘Delete’ and press ENTER/MARK to delete all waypoints within the set location. Choose‘Cancel’ or press QUIT to stop the deletion.To delete all user waypoints:1. Press the MENU key to select the options window.2. Use the ARROW KEYPAD to highlight ‘Delete All’ and then press ENTER/MARK.3. Highlight the ‘OK’ prompt and press ENTER/MARK to confirm. Be sure you want to delete thewaypoints before you press ENTER/MARK. You cannot recover deleted waypoints.4. You will then be asked if you would like to delete all Route Waypoints too. Highlight the ‘OK’ promptand press ENTER/MARK to confirm or highlight ‘Cancel’ and press ENTER/MARK to not delete Routewaypoints. Selecting ‘Cancel’ at this time will not cancel out of the waypoint deletion. It simplyretains waypoints used in routes.NOTE: Once a waypoint is deleted from the list, it cannot be recovered from the unit. It isadvisable to backup important waypoints to a computer using the optional PC cable and inter-face software or write them down by hand.Using WaypointsUser Points Options MenuDeleting waypoints based on distance
