16 GPSMAP 3006C/3010C Owner’s ManualbasIc oPeratIon > revIewIng and edItIng waYPoIntsbasIcoperatIon3. Press the New Waypoint soft key. The Review Waypoint Page appearswith the next available waypoint number and the receiver’s last knownlocation as the default name and location.4. Use the ROCKER to highlight the Position field, and press ENTER.5. Enter position coordinates using the ROCKER or data entry keys, andpress ENTER.6. To accept the waypoint with the default information, press the OK soft keyORTo change any waypoint information, highlight the appropriate field andpress ENTER. After entering your changes, press the OK soft key.Two other options are available on the Review Waypoint Page:• Add to Route—adds the new waypoint to the end of a route.• Move Wpt (waypoint)—moves or projects the waypoint to a new locationon the map.To add a new waypoint to a route:1. Press the Add To Route soft key. The Select Route Page appears.2. Highlight a route or New Route, and press ENTER.3. Press the OK soft key to add the waypoint to the route.For more information about using routes, see “Creating and Using Routes,”beginning on page 25.Reviewing and Editing WaypointsAfter you create a waypoint, you can modify, review, rename, move, or delete itusing the Review Waypoint Page. This page shows waypoint details, and a mapwindow that you can pan or zoom in and out.To access the Review Waypoint Page:Use the ROCKER to highlight a waypoint on the Map Page, and pressENTER.To access the Review Waypoint Page from a waypoint list:1. Press and hold ADJ/MENU to open the Main Menu. Use the ROCKER tohighlight the Points tab, and then highlight a waypoint from the list.2. Press ENTER to open the Review Waypoint Page.NOtE: Additional information tabs do not appear in this mode.Review Waypoint PageMapwndowSymbolWaypontnamePostonCoordnatesCommentDepth/watertemp
