1 GPSMAP 3006C/3010C Owner’s ManualbasIc oPeratIon > revIewIng and edItIng waYPoIntsbasIcoperatIonMoving a WaypointYou can modify a waypoint by moving or “projecting” the distance and bearingfrom its present location to a new location.To move the waypoint on the map:1. Press the Move Wpt soft key. The map window on the right side of thepage is highlighted with the selected waypoint centered and highlighted ona map. The word MOVE appears below the pointer.2. Use the ROCKER to move the waypoint to the new location. The distanceand bearing from the waypoint’s current location appears in the upper-leftcorner of the map window.3. Press ENTER to accept the new waypoint location.4. Press FCTN to return to the left side of the Review Waypoint Page.Using Waypoint ListsThe Points tab on the Main Menu has two sub tabs, User and Proximity, whichallow you to manage a large number of waypoints quickly and efficiently. TheProximity sub tab also provides a continuously updated proximity waypoint alarmthat you can use to define an alarm circle around submerged hazards or shallowwaters.To access the Points tab from the Main Menu:1. Press and hold ADJ/MENU to open the Main Menu.2. Use the ROCKER to highlight the Points tab, and highlight either the Useror Proximity sub tab.Sub tabs
