Garmin GPSMAP 695/696 Owner’s Manual 190-00919-00 Rev. Dappendix c142OverviewGPS NavigationFlight PlanningHazard AvoidanceAdditional FeaturesAppendicesIndexInstalling an SD Card:1) Insert the card into the slot on the top, left side of the unit. Be sure thelabel is facing the front of the unit.2) Firmly push the card into the unit. It is not necessary to force the card. Thehandle is still exposed when it is properly inserted.3) The unit takes a few seconds to read the card. When the data card hasbeen properly installed and accepted, a summary screen noting the carddetails appears. Press ENT Key to acknowledge.If you insert an SD Card and get a card format not recognized message, try removingthe card and reinserting it. If the card is still not recognized, contact Garmin ProductSupport or your Garmin dealer.Removing an SD Card:1) Push the card into the unit until it stops.2) Release the card. The card should eject for easy removal.3) With the card ejected, pull the card out of the slot.GPSMaP 695/696 dataBaSeSThe following databases are included with the GPSMAP ® 695/696 depending on theunit (Americas, Atlantic, or Pacific). See the Additional Feature section for informationon AOPA Airport Directory, FliteCharts®, and SafeTaxi®. See the Hazard Avoidancesection for information on Obstacles and Terrain.