Garmin GPSMAP 695/696 Owner’s Manual190-00919-00 Rev. D 27Overview Overview GPS Navigation Flight Planning Hazard Avoidance Additional Features Appendices IndexPOwerTurning the power loss warning on/off:1) Press the MENU Key twice to display the Main Menu.2) Turn or move the FMS Joystick to highlight ‘System Setup...’, and press theENT Key.3) Turn or move the FMS Joystick to highlight ‘Power’ and press the ENT Key.4) Turn the FMS Joystick to select ‘On’ or ‘Off’, and press the ENT Key.SettiNG airPOrt criteriaThe Page Menu on the Nearest Airports Page allows the pilot to filter out airportsthat do not meet a defined criteria. Specific surface types and runway lengths can bedefined, as well as the option to include private airports and/or heliports.Runway Surface—allows you to set criteria for the type of surface on the runway:• Any—shows any runway, regardless of surface type, including water landingfacilities.• Hard Only—shows only runways with a concrete, asphalt, or similar sealedsurface.• Hard or Soft—shows all runways except water landing facilities.• Water Only—shows only water landing facilities.Minimum Runway Length—allows the pilot to enter a specific length for the shortestrunway allowed.Entering airport criteria:1) Press the NRST Key.2) Turn the FMS Joystick to select the Nearest Airports Page.3) Press the MENU Key to display the Page Menu.4) Turn or move the FMS Joystick to select ‘Set Airport Criteria’, and thenpress the ENT Key. The Airport Criteria Window appears with the currentsettings.
