Garmin RV-BBT600 Series Owner's Manual
Also see for RV-BBT600 Series: Installation instructions
                          | |
Contents
| 
Saving a PresetYou can save your favorite stations or channels as presets.1 Select Music.2 Tune the stereo to a station or a channel.3 Select > Presets.4 Select Save Current or Add preset.Recalling a Preset1 While listening to the radio, select > Presets.2 Select a preset from the list.Removing Presets1 With an applicable source selected, select > Presets >Remove Preset.2 Select an option:• To remove one preset, select the preset.• To remote all presets, select Remove All Presets.Connecting and Listening to an AuxiliaryAudio SourceYou can connect an auxiliary device to the infotainment system.1 Select an option:• Locate the auxiliary input in your vehicle.Auxiliary inputs may be located on the dash or in theconsole, and may be either a 3.5 mm line-in audio jack ora pair of stereo RCA inputs. For more information, seeyour vehicle owner's manual.• Locate the auxiliary inputs on the back of the stereo.For more information, see the RV-BBT600 SeriesInstallation Instructions.NOTE: If a backup camera microphone is connected tothe Aux 2 input, you cannot connect an auxiliary mediadevice to the Aux 2 input.2 Connect your media device to the auxiliary input.3 Select Music, and select Aux 1.4 Control playback using your auxiliary media device.Adjusting the Gain for the Auxiliary DeviceYou can adjust the gain for the connected auxiliary device toachieve a volume level similar to that of other media sources.You can adjust the gain in 1 dB increments.1 Select an auxiliary source.2 Select an option:• To increase the gain, select .• To decrease the gain, select .Auxiliary Device Recommended GainSetting(dB)Portable media player with headphoneoutputfrom -9 dB to -6 dBCD/DVD player with line output -6 dBPortable media player with line output 0 dBGame console with line output 0 dBOlder audio/visual equipment with lineoutput (for example, VHS or cassettedeck)from 6 dB to 9 dBNOTE: To achieve the best audio quality when using aportable media player with headphone output, it may benecessary to adjust the volume control on the media player,instead of adjusting the gain.RV HUB Dock SettingsYou can change the sound and output settings for the dock fromthe music player on the remote. You can also view softwareinformation and update the software for the dock.From the music player, select > Settings.Tone: Adjusts the bass, middle, and treble tones.Zones: Enables you to configure the speaker zones.Subwoofer Filter: Sets the maximum frequency to be sent tothe subwoofer. Higher frequencies are sent to the speakers.Internal Amplifier On: Enables the internal amplifier in thedock. You should disable this option if your speakers arepowered by an external amplifier.Searching: Enables FUSION®Alpha Search Technology(FAST), which allows you to quickly search for tracks by letteror number when using the iPod or MTP sources. You can setthe minimum number of tracks required to enable the FASTmenu. FAST searching is available when your devicecontains more than this number of tracks.NRX Power: Sets the stereo to provide power to an optionalNRX wired remote control accessory. You should enable thisoption only if the wired remote is connected to the stereousing an approved adapter. For more information aboutconnecting an NRX remote control to the dock, see the RV-BBT600 Series Installation Instructions.Tel Mute: Sets the behavior of the stereo when a hands-free kitconnected to the TELEMUTE wire detects an incomingphone call. When a call is received, the stereo can eithermute all audio or play the call audio on the speakers usingthe Aux 1 source.NOTE: To play call audio from a hands-free kit, the audiooutput from the kit must be connected to the Aux 1 input onthe dock. See your hands-free kit instructions for moreinformation about installing the kit.Tuner Region: Sets the region used by the FM, AM, DAB, andSiriusXM sources.Device Name: Sets a name for this stereo.Update: Allows you to reset all settings to the factory defaultvalues or update the dock software from a USB flash drive(Updating Software for the RV HUB Dock, page 17).About: Shows the software versions of the stereo, FUSION-Link™ interface, and connected accessories.Restoring the Dock SettingsYou can restore all the dock features and settings to the factorydefault settings.1 Place the remote in the dock (Docking the RV HUB Remote,page 1).2 Select Music > > Settings > Update > Restore.NavigationVehicle ProfilesA vehicle profile stores characteristics of your vehicle, such asthe height, width, and weight. Routing and navigation arecalculated differently based on your vehicle profile.In most cases, you should use the default manufacturer vehicleprofile. This profile has already been configured by themanufacturer for your vehicle specifications. You can add acustom vehicle profile for alternative vehicle configurations, suchas when you are pulling a trailer, or if you add an accessory thatchanges the overall dimensions of your vehicle.Adding a Vehicle Profile1 Select Settings > Navigation > Vehicle Profile.2 Select .6 Navigation |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine