Garmin RV-BBT600 Series Owner's Manual
Also see for RV-BBT600 Series: Installation instructions
                          | |
Contents
| 
Device and Privacy SettingsTo open the device settings, select Settings > Device.About: Displays the software version number, the unit IDnumber, and information on several other software features.Status: Displays the battery status and hardware information.EULAs: Displays the end-user license agreements.NOTE: You need this information when you update thesystem software or purchase additional map data.Travel History: Allows the device to record information for themyTrends™, Where I’ve Been, and Trip Log features.Clear Travel History: Clears your travel history for themyTrends, Where I’ve Been, and Trip Log features.Legal Information: Displays software license information.Adding AccountsYou can add accounts to your device to synchronize email,appointments, and other data.1 Select Settings > Accounts & Sync > Add Account.2 Select an account type.3 Follow the on-screen instructions.Restoring SettingsYou can restore a category of settings or all settings to thefactory default values.1 Select Settings.2 If necessary, select a settings category.3 Select > Restore.Device MaintenanceGarmin Support CenterGo to support.garmin.com for help and information, such asproduct manuals, frequently asked questions, videos, andcustomer support.Product UpdatesOn your computer, install Garmin Express™ (www.garmin.com/express).This provides easy access to these services for Garmin devices:• Software updates• Map updates• Product registrationUpdating Maps and Software for the RV HUB RemoteYou can use Garmin Express software to download and installthe latest map and software updates for your RV HUB remote.Garmin Express is available for Windows®and Mac®computers.1 On your computer, go to garmin.com/express, and follow theinstructions to download and install the Garmin Expresssoftware.2 Start Garmin Express.3 Connect your RV HUB remote to your computer using a USBcable.4 From Garmin Express, click Add a Device.The Garmin Express software detects your device.5 Click Add Device.6 Follow the on-screen instructions to register your device andadd it to the Garmin Express software.When setup is complete, the Garmin Express softwaresearches for map and software updates for your device.7 Select an option:• To install all available updates, click Install All.• To install a single update, click View Details and select anupdate.NOTE: If a map update is too large for the internal storage ofthe device, the software may prompt you to install a microSDcard in your device to add storage space (Installing aMemory Card for Maps and Data, page 19).The Garmin Express software downloads and installs theupdates onto your device. Map updates are very large, and thisprocess may take a long time on slower Internet connections.Updating Software for the RV HUB DockTo update the software for the RV HUB dock, you must use aUSB flash drive to download and install the update.1 Prepare the USB flash drive (Preparing a USB Flash Drivefor Updates, page 17).2 Connect the USB flash drive to your computer, and downloadthe software updates using Garmin Express (DownloadingSoftware Updates to the Prepared USB Flash Drive,page 17).3 Install the software updates from the USB flash drive onto thedock (Installing Downloaded Updates onto the RV HUBDock, page 18).Preparing a USB Flash Drive for UpdatesTo download software updates onto a USB flash drive, you mustprepare it. This allows the Garmin Express software torecognize the USB flash drive and deliver the correct softwarefor the dock.1 Turn on the vehicle, and place the RV HUB remote in theRV HUB dock.The dock must be receiving power to prepare the USB flashdrive.WARNINGDo not attempt to update the software while operating thevehicle.2 Select an option:• Locate the media USB port in your vehicle.For more information, see your vehicle owner's manual.• Locate the 2.1 A USB port on the back of the RV HUBdock.For more information, see the RV-BBT600 SeriesInstallation Instructions.3 Plug the USB flash drive into the USB port.4 Select Music > > Settings > Update > Create Card.A message appears when the dock has finished preparingthe USB flash drive to receive the software updates.After the USB flash drive is prepared, you should remove theflash drive and download the software updates using GarminExpress (Downloading Software Updates to the Prepared USBFlash Drive, page 17).Downloading Software Updates to the Prepared USB FlashDriveBefore you can download software updates to a USB flash drive,you must prepare the drive (Preparing a USB Flash Drive forUpdates, page 17).1 On your computer, go to garmin.com/express, and follow theinstructions to download and install the Garmin Expresssoftware.2 Start Garmin Express.3 Plug the prepared USB flash drive into a USB port on yourcomputer.4 From Garmin Express, click Add a Device.The Garmin Express software detects your device.Device Maintenance 17 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine