37Creating and Using a Route - OverviewRoute navigation allows you to create a sequenceof intermediate waypoints which lead you to your finaldestination. The eTrex Legend will store 20 routes, eachwith up to 50 waypoints. A route can be created andmodified from the Route Page, waypoints can be addedto a route from Find Menu. More complex routes canbe created using a PC and MapSource mapping programsand then transferred to the unit memory. You can add awaypoint or map item to an existing route at any time.Step-by-Step InstructionsTo create a route:1. Access the ‘Routes’ page from the Main Menu. The pagehas a ‘New’ button, a list of routes, and the number ofunused routes.2. Use the CLICK STICK to highlight the ‘New’button and press it in to display the route setup page.3. With an empty row (dashed) in the route list highlighted,press in on the CLICK STICK to display the Find Menu.4. Use the Find Menu to select a route waypoint from oneof the Find Menu categories and display the InformationPage for selected waypoint, city, exit, point of interest,etc. Highlight the on-screen ‘OK’ button and press in onthe CLICK STICK to place it on the Routes List.5. To add more waypoints to the route, repeat the process inSteps 3 and 4. The route will be named for the fi rst andlast waypoints on the route.You can add waypoints to the end of an existing routeat any time by using the Find Menu.To add a Find Menu item to a route:1. Select an item from the Find Menu and display itsInformation Page.2. Display the page Options Menu and select the ‘Add ToRoute’ option to display the Routes List.3. Highlight and select the route desired and then press inon the CLICK STICK. A ‘Waypoint Added Successfully’message will appear.A Route with listof waypoints.The Routes Page with a listof Routes and the numberof Unused Routes.“Add To Route” optionfrom the Find MenuInformation PagesReferenceRoutes