Garmin eTrex Legend Owner's Manual And Reference Manual

Also see for Etrex Legend - GPS Receiver: Declaration of conformity Specification sheet Quick start guide Tutorial Owner's manual and reference guide

41Navigating a RouteA Route can be navigated using the Map Page or theNavigation Page. The Map Page displays your movement,the route line and waypoints on the route. The NavigationPage provides compass direction and a bearing pointer.To navigate a route:1. Select a route from the Routes List and then press inon the CLICK STICK to display the Route Page.2. Highlight the on-screen ‘Navigate’ button at the bottomof the page and then press in on the CLICK STICK tobegin navigating the route.3. Observe that you have moved to the Navigation Page.4. Move to the Map Page and observe the route displayed onthe map and the position icon indicating your current location.6. Begin moving and observe directional information on theNavigation Page and your progress on the Map Page.7. To stop navigation use the ‘Stop Navigation’ option on eitherpage or the ‘Stop’ button on the Route Page.Navigating a Route on theMap PageNavigation Page withBearing PointerReferenceRoutes4. Next drag the line to a map item or other locationwhere you want to establish a new waypoint and thenpress in on the CLICK STICK to place the new waypoint.A waypoint information page will display. Press the on-screen ‘OK’ button to save the new waypoint, then pressit again after returning to the Route Map.To review, or remove a route waypoint:1. Select the Route from the Routes List and press theCLICK STICK in to display the Route Page.2. Use the CLICK STICK to highlight the desired routeand press in to display the Route Page for that route.3. Use the CLICK STICK to move the map panningarrow to the waypoint you want to review and press in topop-up the options menu. Select ‘Review’ or ‘Remove’and press in again to either display the Information Pagefor that waypoint or remove it from the route.To view the next waypoint in the route:1. Follow Steps 1 and 2 above.2. Place the map panning arrow on the waypoint you arecurrently viewing and press in to display the optionsmenu. Select ‘Next’ and press in again to view thenext waypoint which will be centered on the page.Adding a new waypointwithin a Route