45The Setup Pages - OverviewThe Setup Pages allow you to customize your eTrexLegend to your personal preferences. You can chooseTime settings, Units of Measure, Display backlighting andcontrast settings, Heading measurement, Interface optionsand System operating mode.By highlighting the icons on the Setup Menu and thenpressing in on the CLICK STICK, you can display theSetup Page for each of the menu items.Time Page - OverviewYou can set the time to match your location or for aprojected location anywhere in the world.Time Format - Allows you to choose from12 or 24 hour time format. When you select the12 hour time format, the clock will read like astandard clock with 12 hour AM amd PM cycles. The24 hour option sets the clock to display a 24 hourcycle (Military Time).Time Zone - Can be set to one of the eight USTime Zones, or 24 International Time Zones (nearestcity or geographical region) When selecting ‘Other’you can enter the UTC Time Offset for any othertime zone. Refer to the instructions for setting the UTCTime Offset on page 54 of the Appendices.Daylight Savings Time - Can be turned On or Offor set to Automatic.Step-by-Step InstructionsTo set the time:1. Use the PAGE button to access the Main Menu.2. Use the CLICK STICK to highlight the Setup Icon andthen press it in to display the SetUp Menu.3. Use the CLICK STICK to highlight the TIme icon and thenpress it in to display the TIme Page.4. Use the CLICK STICK to highlight the ‘Time Zone’ fi eldthen press it in to display the list of time zone options.5. Highlight a time zone from the list of 8 U.S. time zonesor 24 international time zones (defined by nearest city orgeographically) and then press in on the CLICK STICK.6. Observe the correct time displayed at the bottom of the page.Setup MenuTime Setup PageTime Zone OptionsDaylightSavingsOptionsTime FormatOptionsSetup PagesReference