Gaspardo Primo E2 Use And Maintenance

Gaspardo Primo E2 Use And Maintenance Manual pdf 10 page image

ENGLISH Use e Maintenance1.3 IDENTIFICATIONEach individual machine has an identification plate (Fig.1.2),indicating the following details:1. Mark and address of the Manufacturer2. Type and model of machine3. Unloaded mass, in Kilograms4. Mass full load, in Kilograms5. Registration of the machine6. Year of manufacture7. Place of manufactureYou are advised to note down your data on theform below, along with the date of purchase (8) andthe dealer’s name (9).8. ..........................................................................9. ..........................................................................This information must always be quoted whenever as-sistance or spare parts are needed.ATTENTION!Do not remove, tamper with or make the CE markaffixed on the machine illegible.Refer to the information provided on the CE mark forthe manufacturer’s contact details (e.g. for requestingspare parts, etc.).When the machine is demolished, destroy theCE marking.Figure 1.2: Identification plate10- EN Cod. F07011577