Gaspardo Primo E2 Use And Maintenance

Gaspardo Primo E2 Use And Maintenance Manual pdf 21 page image

Chapter 4RULES OF USETo obtain the best performance from the equipment,carefully follow what is set up below.ATTENTION!All maintenance work, adjustments and prepa-ration for operation, must be carried out with thepower take-off of the tractor disconnected, themachine on the ground on its supporting feet, thetractor not running, the wheels blocked and thekey turned off.4.1 ATTACHMENT THE TRAC-TORThe machine may be attached to any tractor fitted out witha threepoint universal joint.DANGER!The attachment to the tractor is a very danger-ous phase. Be sure to follow the instructionscarefully throughout the operation.4.1.1 HookingThe correct tractor/machine position, is determined byplacing the equipment at a distance from the tractor sothat the cardan joint remains extended by 5-10 cm from itsmaximum closing position.At this point, proceed as follows:1. Hook the lifter bars onto the pins provided (1, Fig. 4.1- 4.2). Block with the snap split pins. Hook the chainsto the lifting bars.Figure 4.1: Lower linkagesFigure 4.2: Tie rodsFigure 4.3: Inserting the shaft2. Hook the upper third point (2, Fig.4.2); the pin mustbe locked with the specific split pin; using the adjust-21