Section 3 • Scheduled Maintenance ProceduresNovember 2014Part No. 229753 GS-2669 RT • GS-3369 RT • GS-4069 RT 3 - 19B-4Perform Engine Maintenance -Perkins ModelsEngine specifications require that this procedure beperformed every 250 hours or six months,whichever comes first.• Inspect alternator and fan beltsRequired maintenance procedures and additionalengine information is available in thePerkins 403D-11 Operator's Manual(Perkins part number SEBU8311-01).Perkins 403D-11 Operator's ManualGenie part number 131661B-5Test the Key SwitchGenie requires that this procedure be performedevery 250 hours or quarterly, whichever comesfirst.Proper key switch action and response is essentialto safe machine operation. The machine can beoperated from the ground or platform controls andthe activation of one or the other is accomplishedwith the key switch. Failure of the key switch toactivate the appropriate control panel could causea hazardous operating situation.1 Pull out the red Emergency Stop button to theON position at both the ground and platformcontrols.2 Turn the key switch to platform control.3 Check the platform up/down function from theground controls.Result: The machine functions should notoperate.4 Turn the key switch to ground control.5 Check the machine functions from the platformcontrols.Result: The machine functions should notoperate.6 Turn the key switch to the OFF position.Result: The engine should stop and no functionsshould operate.CHECKLIST B PROCEDURES
