7 - 62 Genie S-60 & Genie S-65 Part No. 48412Service Manual - Second EditionSection 7 - Repair Procedures2 Tag, disconnect and plug the hydraulic hosesfrom the motor, brake and manifold. Cap thefittings on the motor, brake and torque hub.Bodily injury hazard.Spraying hydraulic oil canpenetrate and burn skin. Loosenhydraulic connections very slowlyto allow the oil pressure todissipate gradually. Do notallow oil to squirt or spray.3 Remove the motor/brake mounting fasteners,then remove the motor from the brake.a motor/brake mounting boltsb motorc braked torque hub mounting boltse torque hubf plug12-1Rotation Hydraulic MotorHow to Remove the RotationHydraulic MotorWhen removing a hose assemblyor fitting, the O-ring on the fittingand/or hose end must be replacedand then torqued to specificationduring installation. Refer toSection Two, Hydraulic Hose andFitting Torque Specifications.1 Secure the turntable from rotating with theturntable rotation lock pin.Unlocked positionLocked positionTurntable Rotation Componentsbadfec800-610-4101ActionRental.com
