Part No. 48412 Genie S-60 & Genie S-65 4 - 11Service Manual - Second Edition Section 4 - Scheduled Maintenance Procedures11 Check the oil filter and the oil pan drain plug forleaks.12 Swing the engine pivot plate back to its originalposition and replace the two pivot plateretaining bolts.13 Check the engine oil level dipstick. Add oilif needed.Ford LRG-423 Engine 5 quartsOil capacity (including filter) 4.7 litersFord LRG-423 EngineOil viscosity requirementsbelow 60°F / 15.5°C 5W-30-10° to 90°F / -23° to 32°C 10W-30above -10°F / -23°C 10W-40 or 10W-50above 25°F / -4°C 20W-40 or 20W-50Use oils meeting API classification SF (labeled SF/CCor SF/CD) as they offer improved wear protection.A-16Drain the Fuel Filter/ WaterSeparator - Deutz Diesel ModelsEngine specifications require thatthis procedure be performed every100 hours. Poor fuel quality orvery wet conditions maynecessitate performing thisprocedure more often.Proper maintenance of the fuel filter/waterseparator is essential for good engineperformance. Failure to perform this procedure canlead to poor engine performance and componentdamage.Engine fuels are combustible.Perform this procedure in an open,well-ventilated area away fromheaters, sparks, flames andlighted tobacco. Always have anapproved fire extinguisher withineasy reach.Perform this procedure with theengine off.1 Loosen the drain plug located at the bottom ofthe filter. Allow the water to drain into a suitablecontainer until fuel starts to come out.Immediately tighten the drain plug.a fuel filterb drain plugTABLE A PROCEDURESba800-610-4101ActionRental.com
