September 2018 Service and Repair ManualEnginesPart No. 1288652GT S® -60 XC ™ • S® -65 XC ™ 69How to i nstall the Pump and Bell H ousing Ass embl yHow to Install the Pump and BellHousing Assembly1 Install the pump and bell housing assembly.Deutz models: Torque the bell housingmounting bolts labeled "C" in sequence to28 ft-lbs / 38 Nm. Then torque the bell housingmounting bolts labeled "C" in sequence to40 ft-lbs / 54 Nm.Ford models: Torque the bell housingmounting bolts labeled "A" and "B" insequence to 28 ft-lbs / 38 Nm and themounting bolts labeled "C" to 49 ft-lbs / 66 Nm.Then torque the bell housing mounting boltslabeled "A" and "B" in sequence to 40 ft-lbs /54 Nm and the mounting bolts labeled "C" to70 ft-lbs / 95 Nm.Perkins models: Torque the bell housingmounting bolts labeled "B" in sequence to28 ft-lbs / 38 Nm and the mounting boltslabeled "A" to 49 ft-lbs / 66 Nm. Then torquethe bell housing mounting bolts labeled "B" insequence to 40 ft-lbs / 54 Nm and themounting bolts labeled "A" to 70 ft-lbs / 95 Nm.Component damage hazard.When installing the pump, do notforce the pump coupler into theflexplate or damage to the pumpshaft seal may occur.Component damage hazard. Donot force the drive pump duringinstallation or the flex plate teethmay become damaged.Ford ModelsDeutz Models D2011L03i, TD2011L04iDeutz Models D 2.9 L4, TD 2.9 L4
