Service and Repair Manual September 2018Manifolds86 S® -60 XC ™ • S® -65 XC ™ Part No. 1288652GT7-8Traction Manifold Components, 4WDThe traction manifold is mounted inside the drive chassis at the non-steer end.IndexNo. Description SchematicItem Function Torque1 Flow divider/combiner valve DK Divides flow between diagonal pairs ofmotors80-90 ft-lbs / 108-122Nm2 Check valve, 5 psi DC Prevents cavitation in LF motor 35-40 ft-lbs / 14-16Nm3 Orifice, 0.040 inch / 1 mm DA Prevents scrub at high steer angles byallowing some bypass flow around the leftflow divider4 Check valve, 5 psi DF Prevents cavitation in RF motor 35-40 ft-lbs / 14-16Nm5 Orifice, 0.040 inch / 1 mm DN Prevents scrub at high steer angles byallowing some bypass flow around theright flow divider6 Relief valve, 280 psi / 19.3 bar DI Hot oil shuttle relief 35-40 ft-lbs / 14-16Nm7 Flow divider/combiner valve,24 gpmDM Combines return flow from RF and RRmotors80-90 ft-lbs / 108-122Nm8 Flow divider/combiner valve,24 gpmDB Combines return flow from LF and RRmotors80-90 ft-lbs / 108-122Nm9 Check valve, 5 psi DD Prevents cavitation in LF and RRmotors55-60 ft-lbs / 75-81Nm10 Check valve, 5 psi DH Prevents cavitation in RR motor 35-40 ft-lbs / 14-16Nm11 Check valve, 5 psi DE Prevents cavitation in LR motor 35-40 ft-lbs / 14-16Nm12 Check valve, 5 psi DG Prents cavitation in RF and LR motor 55-60 ft-lbs / 75-81Nm13 Shuttle valve, fixed DJ Directs oil from low pressure side to hot oilrelief valve55-60 ft-lbs / 75-81Nm14 Orifice, 0.040 inch / 1 mm DL Prevents scrub at high steer angles byallowing some bypass flow around theright flow divider
