Service and Repair Manual October 2016Engines54 S-80 • S-85 • S-80X Part No. 1269074How to i nstall the Pump and Bell H ousing Ass embl yHow to Install the Pump and BellHousing Assembly1 Install the pump and bell housing assembly.Deutz models: Torque the bell housingmounting bolts labeled "C" in sequence to28 ft-lbs / 38 Nm. Then torque the bell housingmounting bolts labeled "C" in sequence to40 ft-lbs / 54 Nm.Perkins 804D models: Torque the bellhousing mounting bolts in sequence to28 ft-lbs / 38 Nm and then to 49 ft-lbs / 66 Nm.Perkins 404F models:Torque the bellhousing mounting bolts labeled "B" insequence to 28 ft-lbs / 38 Nm and themounting bolts labeled "A" to 49 ft-lbs / 66 Nm.Then torque the bell housing mounting boltslabeled "B" in sequence to 40 ft-lbs / 54 Nmand the mounting bolts labeled "A" to 70 ft-lbs /95 Nm.Continental model:Torque the pumpmounting plate fasteners in sequence to23 ft-lbs / 31.2 Nm.Component damage hazard.When installing the pump, do notforce the pump coupler into theflexplate or damage to the pumpshaft seal may occur.Component damage hazard. Donot force the drive pump duringinstallation or the flex plate teethmay become damaged.Deutz Pump Mounting PlatePerkins 804D Pump Mounting PlatePerkins 404F-22T Pump Mounting PlateContinental Pump Mounting Plate
