April 2016 Service ManualTurntable Rotation ComponentsPart No. 139234 Z-34/22 Bi-Energy 10311-1Rotation Hydraulic MotorHow to R emove the Tur ntabl e R otation M otorHow to Remove the TurntableRotation MotorNote: When removing a hose assembly or fitting,the O-ring (if equipped) on the fitting and/or hoseend must be replaced. All connections must betorqued to specification during installation. Refer toSpecifications, Hydraulic Hose and Fitting TorqueSpecifications.Note: Do not allow the turntable to rotate until thehydraulic motor is installed.1 Tag, disconnect and plug the hydraulic hosesfrom the turntable rotation motor. Cap thefittings on the motor.Bodily injury hazard. Sprayinghydraulic oil can penetrate andburn skin. Loosen hydraulicconnections very slowly to allowthe oil pressure to dissipategradually. Do not allow oil tosquirt or spray.2 Remove the turntable rotation motor mountingbolts. Remove the motor from the machine.
