Service Manual April 2016Generator86 Z-34/22 Bi-Energy Part No. 1392347-1Generator PulleyHow to R emove the Generator PulleyHow to Remove the GeneratorPulley1 Loosen the tension adjustment bolt on thegenerator.2 Push the generator towards the machine andremove the belts from the generator pulley.3 Remove the generator pulley retaining nutfrom the generator shaft.4 Slide the pulley off of the generator shaft.5 Loosen the set screw on the pulley bushing,then slide the pulley bushing off of thegenerator shaft.1 gap2 shaft3 set screw4 engine drive pulley5 engine drive pulley bolt6 shaft bushing7 woodruff keyHow to Ins tall the Generator Pull eyHow to Install the GeneratorPulleyNote: The pulley on the generator must be installedbefore installing the engine drive pulley.1 Align the woodruff key on the generator shaftwith the slot in the pulley and slide the pulleyall the way onto the generator shaft.2 Install the flat washer and pulley retaining nutonto the generator shaft, then torque the nut tospecification. Refer to Specifications,Generator.3 Adjust the tension of the generator belts. Referto Repair Procedure, How to Adjust theGenerator Belts.
