MIM-1AMM/MIM-1ASM/MIM-1ASL 105Interface Cable The MIM-1G.SHDSL module uses regular telephone cables for connection.n Telephone cables have been included in the standard shipment package ofMIM-1G.SHDSL.Connecting the InterfaceCableYou only need a telephone cable to connect one port on a G.SHDSL module to thePSTN network.MIM-1AMM/MIM-1ASM/MIM-1ASLIntroduction By far, the following ATM modules are available for the routers:■ 1-port ATM (Asynchronous Transfer Mode) 155 Mbps multimode fiberinterface module (MIM-1AMM)■ 1-port ATM 155 Mbps single-mode fiber interface module (MIM-1ASM)■ 1-port ATM 155 Mbps single-mode long-haul fiber interface module(MIM-1ASL)These ATM modules function in the system to provide ATM interfaces for routers,supporting:■ Two frame formats: SDH STM-1 and SONET OC-3;■ Scrambling in data transmission;■ Both line clock (when working as DTE interface), and internal clock (whenworking as DCE interface);■ Local cell loopback, local payload loopback, and remote loopback.Interface AttributesTable 64 Description of the LEDs on the MIM-1G.SHDSL panelLED DescriptionLINK OFF means no link is present; ON means alink is present.ACT OFF means no data is being transmitted orreceived; blinking means data is beingreceived or/and transmitted.Table 65 Interface attributes of MIM-1AMM/MIM-1ASM/MIM-1ASLAttribute MIM-1AMM module MIM-1ASM moduleMIM-1ASLmoduleOptical fiber connector SCNumber of ports 1Interface standard SONET OC-3/SDH STM-1Interface rate 155 Mbps
