3-2To do... Use the command... RemarksConfigure thecurrent switch to bean HABP serverhabp server vlan vlan-idRequiredBy default, a switch operates as anHABP client after you enable HABPon the switch. If you want to use theswitch as a management switch,you need to configure the switch tobe an HABP server.Configure theinterval to sendHABP requestpackets.habp timer intervalOptionalThe default interval for an HABPserver to send HABP requestpackets is 20 seconds.HABP Client ConfigurationHABP clients reside on switches attached to HABP servers. After you enable HABP for aswitch, the switch operates as an HABP client by default. So you only need to enable HABPon a switch to make it an HABP client.Follow these steps to configure an HABP client:To do... Use the command... RemarksEnter system view system-view —Enable HABP habp enableOptionalHABP is enabled by default. And aswitch operates as an HABP clientafter you enable HABP for it.Displaying and Maintaining HABP ConfigurationTo do... Use the command... RemarksDisplay HABP configurationand status display habp Available in any viewDisplay the MAC addresstable maintained by HABP display habp table Available in any viewDisplay statistics on HABPpackets display habp traffic Available in any view
