1-15To do… Use the command… RemarksEnter system view system-view —Enable the HWPing clientfunction hwping-agent enableRequiredBy default, the HWPing clientfunction is disabled.Create a HWPing test groupand enter its viewhwping administrator-nameoperation- tagRequiredBy default, no test group isconfigured.Enable the HWPing client tosend Trap messagessend-trap { all | { probefailure| testcomplete | testfailure }* }RequiredBy default, Trap sending isdisabled.Configure the number ofconsecutive unsuccessfulHWPing tests before Trapoutputtest-failtimes timesOptionalBy default, Trap messages aresent each time a test fails.Configure the number ofconsecutive unsuccessfulHWPing probes before Trapoutputprobe-failtimes timesOptionalBy default, Trap messages aresent each time a probe fails.Displaying HWPing ConfigurationTo do… Use the command… RemarksDisplay test history display hwping history [ administrator-nameoperation-tag ]Display the results of the latesttestdisplay hwping results [ administrator-nameoperation-tag ]Available inany viewHWPing Configuration ExamplesICMP TestNetwork requirementsAn H3C S5100-SI/EI series Ethernet switch serves as the HWPing client. A HWPing ICMP test betweenthe switch and another switch uses ICMP to test the round trip time (RTT) for packets generated by theHWPing client to travel to and back from the destination switch.Network diagramFigure 1-2 Network diagram for the ICMP test
