1-4Table 1-4 Display and maintain stack configurationsOperation Command DescriptionDisplay the stackstatus information onthe main switchdisplay stacking[ members ]OptionalThe display command can be executed inany view.When being executed with the memberskeyword not specified, this commanddisplays the main switch and the number ofswitches in the stack.When being executed with the memberskeyword specified, this command displaysthe member information of the stack,including stack number , device name,MAC addresses and status of the mainswitch/slave switches.Display the stackstatus information on aslave switchdisplay stackingOptionalThe display command can be executed inany view.The displayed information indicates that thelocal switch is a slave switch. Theinformation such as stack number of thelocal switch, and the MAC address of themain switch in the stack is also displayed.Stack Configuration ExampleNetwork requirementsConnect Switch A, Switch B and Switch C with each other through their stack ports to form a stack, inwhich Switch A acts as the main switch, while Switches B and C act as slave switches.Configure Switches B and Switch C through Switch A.Network diagramFigure 1-1 Network diagram for stack configuration
