1-2The loading process of the Boot ROM software is the same as that of the host software, except thatduring the former process, you should press “6” or and after entering the BOOTmenu and the system gives different prompts. The following text mainly describes the Boot ROMloading process.BOOT MenuStarting......************************************************************* ** H3C S5100-16P-PWR-EI BOOTROM, Version 616 ** *************************************************************Copyright(c) 2004-2007 Hangzhou H3C Technologies Co., Ltd.Creation date : Apr 16 2007, 11:29:53CPU Clock Speed : 200MHzBUS Clock Speed : 33MHzMemory Size : 64MBMac Address : 000fe2123456Press Ctrl-B to enter Boot Menu...Press . The system displays:Password :To enter the BOOT menu, you should press within five seconds (full startup mode) or onesecond (fast startup mode) after the information “Press Ctrl-B to enter BOOT Menu...” displays.Otherwise, the system starts to extract the program; and if you want to enter the BOOT Menu at thistime, you will have to restart the switch.Enter the correct Boot ROM password (no password is set by default). The system enters the BOOTMenu:BOOT MENU