H3C S5120-EI Series Command Reference Manual

Also see for S5120-EI Series: Configuration guide Installation manual Configuration guide Configuration guide Operation manual

Contents

H3C S5120-EI Series Command Reference Manual Manual pdf 108 page image

98Filename prefix Filename prefix of the saved configuration filesArchive interval in minutes Configuration file saving interval, in minutes.If the automatic saving is disabled, this field is not displayed.Filename Filename of the saved configuration files, with path excluded.display current-configurationSyntaxdisplay current-configuration [ [ configuration [ configuration ] | interface [ interface-type ][ interface-number ] ] [ by-linenum ] [ | { begin | exclude | include } regular-expression ] ]ViewAny viewDefault level2: System levelParametersconfiguration [ configuration ]: Specifies to display non-interface configuration. If no parameter is used,all the non-interface configuration is displayed; if parameters are used, display the specified information.For example:• isis: Displays the isis configuration.• isp: Displays the ISP configuration.• post-system: Displays the post-system configuration.• radius-template: Displays the Radius template configuration.• system: Displays the system configuration.• user-interface: Displays the user interface configuration.interface [ interface-type ] [ interface-number ]: Displays the interface configuration, where interface-typerepresents the interface type and interface-number represents the interface number.by-linenum: Specifies to display the number of each line.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see CLI configuration in the Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.DescriptionUse the display current-configuration command to display the current validated configuration of adevice.To view the validated configuration, use the display current-configuration command. A parameter is notdisplayed if it has the default configuration. If the validated parameter is changed, although you haveconfigured it, the validated parameter is displayed. For example, IP address 11.11.11.11 24 has been