H3C S5120-EI Series Command Reference Manual

Also see for S5120-EI Series: Configuration guide Installation manual Configuration guide Configuration guide Operation manual

Contents

H3C S5120-EI Series Command Reference Manual Manual pdf 44 page image

34ParametersNoneDescriptionUse the ip https enable command to enable the HTTPS service.Use the undo ip https enable command to disable the HTTPS service.By default, the HTTPS service is disabled.The device can act as the HTTP server if the HTTP service is enabled.Enabling the HTTPS service triggers an SSL handshake negotiation process.• If the local certificate of the device exists, the SSL negotiation succeeds, and the HTTPS service canbe started.• If no local certificate exists, the SSL negotiation triggers a certificate application process that oftenfails because it times out. If that happens, execute the ip https enable command multiple times tostart the HTTPS service.Related commands: display ip https.Examples# Enable the HTTPS service. system-view[Sysname] ip https enableip https portSyntaxip https port port-numberundo ip https portViewSystem viewDefault level3: Manage levelParametersport-number: Port number of the HTTPS service, which ranges from 1 to 65535.DescriptionUse the ip https port command to configure the port number of the HTTPS service.Use the undo ip https port command to restore the default.By default, the port number of the HTTPS service is 443.Verify that the port number is not used by another service, because this command does not check forconflicts with configured port numbers.Related commands: display ip https.Examples# Configure the port number of the HTTPS service as 6000.