65Appendix B FRUs and compatibilitymatrixesFRUs and compatibility matrixesFRUs S5130-30S-HIS5130-54S-HIS5130-30C-HIS5130-54C-HIS5130-34C-HIS5130-30F-HIS5130-30C-PWR-HIS5130-54C-PWR-HI S5130-54QS-HIHot swappable power modulesPSR150-A1 N/A Supported N/A SupportedPSR150-D1 N/A Supported N/A SupportedPSR360-56A N/A N/A Supported N/APSR720-56A N/A N/A Supported N/APSR1110-56A N/A N/A Supported N/AHot swappable fan traysLSPM1FANSA N/A Supported Supported SupportedLSPM1FANSB N/A Supported Supported SupportedExpansion cardsLSWM2SP2PM N/A Supported Supported N/ALSWM2XGT2PM N/A Supported Supported N/ALSPM6QP2PS N/A Supported Supported N/ALSPM6FWD N/A Supported N/A N/AThe PSR360-56A, PSR720-56A, PSR1110-56A, PSR150-A1, and PSR150-D1 power modulessupport asset management. You can use the display device manuinfo command to view thename, sequence number, and vendor of the power modules you have installed on the device.You can install one power module, or two power modules for redundancy on the S5130-30C-HI,S5130-34C-HI, S5130-30F-HI, S5130-54C-HI, and S5130-54QS-HI switches. These switchessupport mix of an AC power module and a DC power module.You can install one power module, or two power modules for redundancy on theS5130-30C-PWR-HI and S5130-54C-PWR-HI switches. The PoE capabilities of these switches varyby power module configuration. For more information, see Table 11.All S5130-HI switch models except the S5130-30S-HI and S5130-54S-HI switches support hotswapping of fan trays. You must install two fan trays of the same model for the switch. Do not poweron the switch when it does not have any fan trays or has only one fan tray installed.Support for the LSPM6QP2PS and LSPM6FWD cards varies by software version. For moreinformation, see the release notes for the switch.
