67Item SpecificationsInput voltage 12 VMaximum power consumption 9.8 WReference H3C LSPM1FANSA & LSPM1FANSB Fan Trays User GuideLSPM1FANSB fan trayDimensions 40 × 40 × 104 mm (1.57 × 1.57 × 4.09 in)Fan speed 20000 R.P.MMax airflow 20 CFMAirflow direction Front to back (from the network port side to the power module side)Input voltage 12 VMaximum power consumption 9.8 WReference H3C LSPM1FANSA & LSPM1FANSB Fan Trays User GuideHot swappable expansion cardsThe S5130-30C-HI, S5130-34C-HI, S5130-30F-HI, S5130-54C-HI, S5130-30C-PWR-HI, andS5130-54C-PWR-HI switches provide an expansion card slot at the rear. The following tabledescribes the expansion cards available for these switches.Card type Card model Port type and quantity RemarksInterfacecardLSWM2SP2PM 2 × 1/10 GE SFP+ fiber port For available transceiver modules andcables, see Table 20 and Table 21.LSWM2XGT2PM 2 × 1/10GBASE-T Ethernetport For port specifications, see Table 16.LSPM6QP2PS 2 × 20 GE QSFP+ port For available cables, see Table 22.Service card LSPM6FWD N/AIt is the fourth-generation firewall carddeveloped by H3C, integratingfirewall, VPN, content filtering andidentification, URL filtering, and NATfeatures.For more information about these interface cards, see user manuals for the interface cards. For moreinformation about the service card, see its card manual.NOTE:• When you install the LSWM2SP2PM and LSWM2XGT2PM interface cards on the switch, theports on the interface cards can operate only at 10 Gbps.• The LSPM6FWD firewall card adds 75 mm (2.95 in) to the depth of the switch, as shownin Figure 48.Connecting cables to the copper ports on the interface cardsThe LSWM2XGT2PM interface card provides copper ports. To connect cables to the copper ports onthe LSWM2XGT2PM interface card, follow these guidelines:
