1-16Self-service = DisabledUse the following command to view the port security configuration information: display port-security interface gigabitethernet 1/0/1Equipment port-security is enabledTrap is disabledDisableport Timeout: 20sOUI value:Index is 1, OUI value is 123401Index is 2, OUI value is 123402Index is 3, OUI value is 123403Index is 4, OUI value is 123404Index is 5, OUI value is 123405GigabitEthernet1/0/1 is link-upPort mode is userLoginWithOUINeedToKnow mode is disabledIntrusion Protection mode is NoActionMax MAC address number is not configuredStored MAC address number is 0Authorization is permittedAfter an 802.1X user gets online, you can see that the number of secure MAC addresses stored is 1.You can also use the following command to view information about 802.1X users: display dot1x interface gigabitethernet 1/0/1Equipment 802.1X protocol is enabledCHAP authentication is enabledEAD quick deploy is disabledConfiguration: Transmit Period 30 s, Handshake Period 15 sQuiet Period 60 s, Quiet Period Timer is disabledSupp Timeout 30 s, Server Timeout 100 sThe maximal retransmitting times 2EAD quick deploy configuration:EAD timeout: 30mThe maximum 802.1X user resource number is 1024 per slotTotal current used 802.1X resource number is 1GigabitEthernet1/0/1 is link-up802.1X protocol is enabledHandshake is enabledThe port is an authenticatorAuthentication Mode is AutoPort Control Type is Mac-based802.1X Multicast-trigger is enabledMandatory authentication domain: NOT configuredGuest VLAN: NOT configuredMax number of on-line users is 256
