H3C S5560-EI series Installation Manual

Also see for S5560-EI series: Troubleshooting guide

Contents

H3C S5560-EI series Installation Manual Manual pdf 38 page image

29Figure 37 Installing a power moduleFigure 38 PSR1110-56A installed in the chassisRemoving a PSR360-56A/PSR720-56A/PSR1110-56A powermodule1. Wear an ESD wrist strap and make sure it makes good skin contact and is reliably grounded.2. Disconnect the power cord.3. Press the latch towards the handle, and pull the power module along the guide rails until it ispart-way out.4. Grasp the handle of the power module with one hand, support the bottom with the other hand, andpull the power module slowly along the guide rails out of the slot.Put away the removed power module in an antistatic bag or the power module package bag forfuture use.5. Install the filler panel to prevent dust and ensure good ventilation if no power module is installedin the slot.