77USB portThe switch has one OHC-compliant USB2.0 port that can upload and download data at a rate up to 480Mbps. You can use this USB port to access the file system on the flash of the switch, for example, toupload or download application and configuration files.NOTE:USB devices from different vendors vary in compatibilities and drivers. H3C does not guarantee the correctoperation of USB devices from all vendors on the switch. If a USB device fails to operate on the switch,replace it with one from another vendor.10/100/1000BASE-T autosensing Ethernet portTable 20 10/100/1000BASE-T autosensing Ethernet port specificationsItem SpecificationConnector type RJ-45Interface attributes• 10 Mbps, full duplex• 100 Mbps, full duplex• 1000 Mbps, full duplex• MDI/MDI-X, auto-sensingMax transmissiondistance 100 m (328.08 ft)Transmission medium Category-5 (or above) twisted pair cableStandards IEEE 802.3i, 802.3u, 802.3ab1/10BASE-T autosensing Ethernet portThe LSWM2XGT2PM and LSWM2XGT8PM interface cards provide 1/10BASE-T autosensing Ethernetports.Table 21 1/10BASE-T autosensing Ethernet port specificationsItem SpecificationConnector type RJ-45Interface attributes 1/10 Gbps, full duplex, MDI/MDI-X auto-sensingMax transmissiondistance• Category-6 UTP—55 m (180.45 ft)• Category-6 STP—100 m (328.09 ft)• Category-6 SFTP—100 m (328.09 ft)• Category-6 and above twisted pair—100 m (328.09 ft)Transmission medium Category-6 (or above) twisted pair cableStandards IEEE 802.3an, 802.3ab
