81Figure 80 SFP+ cable(1) Connector (2) Pull latchNOTE:• The fixed SFP+ ports on the switch do not support the SFP-XG-LH40-SM1550, SFP-XG-LH80-SM1550,SFP-XG-LH80-SM1550-D, and SFP-XG-LX220-MM1310 transceiver modules.• The LSWM2SP8P interface card does not support the SFP-XG-LX220-MM1310 transceiver module.• As a best practice, use only H3C SFP/SFP+ transceiver modules and cables for the SFP+ ports.• The H3C SFP/SFP+ transceiver modules and cables available for the SFP+ ports are subject to changeover time. For the most recent list of SFP/SFP+ transceiver modules and cables, contact your H3CSupport or marketing staff.• For the specifications of H3C SFP/SFP+ transceiver modules and cables, seeH3C Transceiver ModulesUser Guide.QSFP+ portThe S5560-30S-EI, S5560-54S-EI, and S5560-54QS-EI switches and the LSWM2QP2P interface cardprovide QSFP+ ports. You can install the QSFP+ transceiver modules in Table 26, the QSFP+ cablesin Table 27, and the QSFP+ to SFP+ cables in Table 28 in the QSFP+ ports.Table 26 QSFP+ transceiver modules available for the QSFP+ portsQSFP+ transceivermoduleCentralwavelength(nm)ConnectorFiber typeanddiameter(μm)Modalbandwidth(MHz × km)Max transmissiondistanceQSFP-40G-SR4-MM850 850 MPO Multi-mode,50/1252000 100 m (328.08 ft)4700 150 m (492.12 ft)QSFP-40G-CSR4-MM850 850 MPO Multi-mode,50/1252000 300 m (984.25 ft)4700 400 m (1312.33 ft)QSFP-40G-LR4-WDM1300Four lanes:• 1271.• 1291.• 1311.• 1331.LC Single-mode, 9/125 N/A 10 km (6.21 miles)
