84LED mark Status DescriptionSteady yellow A power module is installed in power module slot 1, but the powermodule has failed or no power is input to the power module.Off No power module is installed in power module slot 1.PWR2Steady green A power module is installed in power module slot 2, and thepower module is outputting power correctly.Steady yellow A power module is installed in power module slot 2, but the powermodule has failed or no power is input to the power module.Off No power module is installed in power module slot 2.RPS status LEDThe S5560-30S-EI and S5560-54S-EI switches support RPS DC input. The RPS status LED shows the statusof the RPS DC input.Table 31 RPS status LED descriptionLED mark Status DescriptionRPSSteady green Both the RPS DC input and the AC input are normal.Steady yellow The RPS DC input is normal, but the AC input is disconnected or hasfailed.Off The RPS DC input is abnormal or no RPS is connected.LED for the port LED mode (MODE)To show more information about the switch through the port status LEDs, all S5560-EI switches except theS5560-54QS-EI switch provides a MODE LED to indicate the type of information that the port LEDs areshowing.You can use the LED mode switching button to change the indication of the MODE LED.Table 32 Description for the MODE LEDLED mark Status DescriptionMODESteady green The port status LEDs are showing port rates.Flashing green (1 Hz) (availableonly for S5560-30C-PWR-EI andS5560-54C-PWR-EI switches)The port status LEDs are showing the status of PoEpower supply on the ports.Flashing yellowThe port status LEDs indicates the IRF member ID ofthe switch. For example, if the LEDs for ports 1 to 5are steady green and the other LEDs are off, the IRFmember ID of the switch is 5.
