H3C S5820X-28S Installation Manual

Also see for S5820X-28C: Command reference Installation manual Manual

4-6CPLD Version : 001PCB Version : Ver.BMac Address : 00e0f2005820Press Ctrl-B to enter Extended Boot menu...4The last line asks whether you want to enter the Boot Menu. The system waits five seconds for yourresponse.z The system has two startup modes: normal startup and fast startup. The normal startup moderequires a little longer time than the fast startup mode because of more self-test operations.z By default, the system starts up in normal mode and the waiting time here is five seconds. If you setthe startup mode to fast, the waiting time is one second. The following section describes the settingof the startup mode.z If you press Ctrl + B within five seconds, the Boot Menu is displayed:BOOT MENU1. Download application file to flash2. Select application file to boot3. Display all files in flash4. Delete file from flash5. Modify BootRom password6. Enter BootRom upgrade menu7. Skip current configuration file8. Set BootRom password recovery9. Set switch startup mode0. RebootEnter your choice(0-9):Table 4-2 describes the fields above.Table 4-2 Description on the fieldsItem Description1. Download application file to flash Download the application file to the flash memory2. Select application file to boot Select the application file to boot3. Display all files in flash Display all files in the flash memory4. Delete file from flash Delete files from the flash memory5. Modify BootRom password Modify the Boot ROM password6. Enter BootRom upgrade menu Enter the Boot ROM update menu7. Skip current configuration file Skip the current configuration file (this configuration is validonce)