5-20N]:yNow updating bootrom, please wait...Step3 Load the application file, and specify the file as the main program file. boot-loader file update.bin slot 1 mainThis command will set the boot file of the specified board. Continue? [Y/N]:yThe specified file will be used as the main boot file at the next reboot on slot 1! display boot-loaderSlot 1The current boot app is: flash:/update.binThe main boot app is: flash:/update.binThe backup boot app is: flash:/update.bin rebootz After loading the application file, use the reboot command to restart the switch to make the updatetake effect (make sure you have saved other configurations before restart).z If the flash memory does not have enough space, you can load the Boot ROM file first, and thendelete certain application files from the flash memory (you are recommended to delete the unusedhost program files); then, load the application file to the switch through FTP for update.z Avoid any power failure during the loading process.Loading Software Using TFTPLoading a file through TFTP is similar to loading a file through FTP. The switch can serve only as aTFTP client that downloads the file from the TFTP server to its flash memory. The procedure afterdownload is the same as loading the file remotely through FTP.