4-7Item Description8. Set BootRom password recovery Restore the Boot ROM password9. Set switch startup mode Set the startup mode of the switch0. Reboot Restart the switchz If you perform no operation or press a key other than Ctrl + B within five seconds, once theremaining waiting time becomes zero, the system begins to automatically start up and the followinginformation is displayed:Starting to get the main application file--flash:/S5820_release.bin............The main application file is self-decompressing......................................................................................................................................................................................................................................................................................................................................................................................Done!System is starting...Board checking.......................LSW15828SSDRAM fast selftest........................OK!Flash fast selftest........................OK!CPLD selftest..............................OK!Switch chip selftest.......................OK!PHY selftest...............................OK!Please check leds....................FINISHED!User interface aux0 is available.Press ENTER to get started.The appearance of "Press ENTER to get started" indicates that the automatic startup of the switch iscomplete.Press Enter. The following prompt is displayed:You can configure the switch now.Changing the Boot ModeBy default, the system starts up in normal boot mode. If you want to change the boot mode to fast, pressCtrl + B within five seconds to enter the Boot Menu showed below:BOOT MENU1. Download application file to flash2. Select application file to boot3. Display all files in flash4. Delete file from flash5. Modify BootRom password