H3C S7500E Series Command Reference Manual

Also see for H3C S7500E Series: Installation manual Operation manual Command manual Installation manual Configuration guide

H3C S7500E Series Command Reference Manual Manual pdf 305 page image

16-3PORT VLAN MODE-----------------------------------------------GigabitEthernet2/0/1 2 AUTOGigabitEthernet2/0/2 3 AUTOTable 16-2 display voice vlan state command output descriptionField DescriptionVoice VLAN system capacity Maximum number of voice VLANs supported by the systemCurrent Voice VLAN Count Number of existing voice VLANsVoice VLAN security mode Security mode of the voice VLAN: Security for security mode; Normal fornormal modeVoice VLAN aging time Aging time of the voice VLANCurrent voice vlan enabled portand its mode Voice VLAN-enabled port and its voice VLAN assignment modePORT Voice VLAN-enabled port nameVLAN ID of the voice VLAN enabled on the portMODE Voice VLAN assignment mode of the port: manual or automatic.voice vlan agingSyntaxvoice vlan aging minutesundo voice vlan agingViewSystem viewDefault Level2: System levelParametersminutes: Voice VLAN aging time, in the range 5 to 43200 minutes.DescriptionUse the voice vlan aging command to configure the voice VLAN aging time.Use the undo voice vlan aging command to restore the default.By default, the voice VLAN aging time is 1440 minutes.When a port in automatic voice VLAN assignment mode receives a voice packet, the system decideswhether to assign the port to the voice VLAN based on the source MAC address of the voice packet.Upon assigning the port to the voice VLAN, the system starts the aging timer. If no voice packets arereceived on the port until the aging time expires, the system automatically removes the port from thevoice VLAN. This aging time only applies to the ports in automatic voice VLAN assignment mode.Related commands: display voice vlan state.