H3C S7500E Series Command Reference Manual

Also see for H3C S7500E Series: Installation manual Operation manual Command manual Installation manual Configuration guide

H3C S7500E Series Command Reference Manual Manual pdf 84 page image

2-25Examples# In OLT port view, add OLT 3/0/1 to fiber backup group 1. system-view[Sysname] ftth[Sysname-ftth] fiber-backup group 1Create group ID successfully.[Sysname-fiber-group1] quit[Sysname] interface olt 3/0/1[Sysname-Olt3/0/1] port fiber-backup group 1port hybrid pvid vlanSyntaxport hybrid pvid vlan vlan-idundo port hybrid pvidViewOLT port viewDefault Level2: System levelParametersvlan-id: VLAN ID, in the range of 1 to 4094.DescriptionUse the port hybrid pvid vlan command to configure the default VLAN ID of the hybrid port.Use the undo port hybrid pvid command to restore the default.By default, the default VLAN of a hybrid port is VLAN 1.To add default VLAN tags to the untagged inbound packets on an OLT port, make sure the defaultVLAN ID is configured for the OLT port and QinQ is enabled on the port (by using the qinq enablecommand).Examples# Configure VLAN 100 as the default VLAN of the hybrid port OLT 2/0/1. system-view[Sysname] vlan 100[Sysname-vlan100] quit[Sysname] interface olt 2/0/1[Sysname-Olt2/0/1] port hybrid pvid vlan 100port hybrid vlanSyntaxport hybrid vlan vlan-id-list { tagged | untagged }undo port hybrid vlan vlan-id-list