95Table 21 Command outputField DescriptionQueueTypeQueue type:• UNICAST—Unicast queue.• MULTICAST—Multicast (including broadcast) queue.• MIXCAST—Mixcast queue, which can accommodate unicast, multicast,and broadcast traffic.QueueID Queue number.Dst-NodeID Peer node number. If no peer node exists, two hyphens (--) are displayed.Length Queue length (number of packets that can be buffered).FullTimes Times that the queue is full.Packet Total number of packets in the queue.ipc performance enableUse ipc performance enable to enable IPC performance statistics.Use undo ipc performance to disable IPC performance statistics.Syntaxipc performance enable { node node-id | self-node } [ channel channel-id ]undo ipc performance enable [ node node-id | self-node ] [ channel channel-id ]DefaultIPC performance statistics is disabled.ViewsUser viewDefault command level1: Monitor levelParametersnode node-id: Enables IPC performance statistics for the node specified by the node-id argument. Thefollowing matrix shows the value ranges for the node-id argument:SR6602 SR6602-X SR6604/SR6608/SR6616 SR6604-X/SR6608-X/SR6616-X0 to 1 0 to 2• 0 to 3 for SR6604• 0 to 5 for SR6608• 0 to 9 for SR6616• 0 to 13 for SR6604-X• 0 to 15 for SR6608-X• 0 to 19 for SR6616-Xself-node: Enables IPC performance statistics for the local node.channel channel-id: Enables IPC performance statistics for the channel specified by the channel-idargument.