56Syntaxresolve-target domain-nameundo resolve-targetDefaultNo domain name is configured.ViewsDNS operation viewDefault command level2: System levelParametersdomain-name: Specifies the domain name to be resolved. It is a case-insensitive string separated by dots(.), each part consisting of 1 to 63 characters. The total length must be within 255 characters. Validcharacters in a part include letters, digits, hyphens (-), and underscores (_).Examples# Set the domain name domain1 to be resolved. system-view[Sysname] nqa entry admin test[Sysname-nqa-admin-test] type dns[Sysname-nqa-admin-test-dns] resolve-target domain1route-option bypass-routeUse route-option bypass-route to enable the routing table bypass function to test the direct connectivityto the direct destination.Use undo route-option bypass-route to disable the routing table bypass function.Syntaxroute-option bypass-routeundo route-option bypass-routeDefaultThe routing table bypass function is disabled.ViewsDLSw operation view, DNS operation view, FTP operation view, HTTP operation view, ICMP echooperation view, SNMP operation view, TCP operation view, UDP echo operation view, UDP jitteroperation view, voice operation viewDefault command level2: System levelUsage guidelinesWhen the routing table bypass function is enabled, the routing table is not searched, and the packet issent directly to the destination in a directly connected network.
