177NetStream-enabled device and not updated on the NetStream server, the server is unable to associatethe received statistics with its proper fields. To avoid such situation, configure the refresh interval forversion 9 templates so that the NetStream server can refresh them on time.The refresh frequency and interval can be both configured, and the template is resent when either of thecondition is reached.Examples# Configure the device to wait for 60 minutes before sending NetStream version 9 templates again to theNetStream server. system-view[Sysname] ip netstream export v9-template refresh-rate time 60Related commandsip netstream export v9-template refresh-rate packetip netstream export versionUse ip netstream export version 5 to export NetStream data in version 5 format, and choose whether torecord data about AS information.Use ip netstream export version 9 to export NetStream data in version 9 format, and choose whether torecord data about AS and BGP next hop information. Statistics about BGP next hop can be exported inversion 9 format only.Use undo ip netstream export version to restore the default.Syntaxip netstream export version 5 [ origin-as | peer-as ]ip netstream export version 9 [ origin-as | peer-as ] [ bgp-nexthop ]undo ip netstream export versionDefaultNetStream traditional data export uses version 5 format. NetStream aggregation data export usesversion 8 format. MPLS flow data are not exported. The peer AS numbers are exported. The BGP nexthop is not exported.ViewsSystem viewDefault command level3: Manage levelParametersorigin-as: Exports statistics of the source AS originating the route for the source address, and thedestination AS for the destination address.peer-as: Exports statistics of the peer ASs for the source and destination address.bgp-nexthop: Exports statistics about BGP next hops.
