204Usage guidelinesIf no channel is specified, the command displays information about all channels.Examples# Display information about channel 0. display channel 0channel number:0, channel name:consoleMODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVELffff0000 default Y informational Y debugging Y debuggingThe output shows that the system is allowed to output log information with a severity from 0 to 4, trapinformation with a severity from 0 to 7, and debug information with a severity from 0 to 7 to the console.The information source modules are all modules (default).Table 44 Command outputField Descriptionchannel number Channel number in the range 0 to 9.channel name Channel name. For more information, see info-center channel name.MODU_ID ID of the source module.NAMEName of the source module."default" means all modules are allowed to output system information, butthe actual modules depend on the device model.ENABLE Indicates whether log output is enabled, Y or N.LOG_LEVEL Log information severity. See Table 45 for details.ENABLE Indicates whether trap output is enabled, Y or N.TRAP_LEVEL Trap information severity See Table 45 for details.ENABLE Indicates whether debug output is enabled, Y or N.DEBUG_LEVEL Debug information severity. See Table 45 for details.display info-centerUse display info-center to display information center configuration information.Syntaxdisplay info-center [ | { begin | exclude | include } regular-expression ]ViewsAny viewDefault command level1: Monitor levelParameters|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.
