230Syntaxterminal loggingundo terminal loggingDefaultThe display of log information on the current terminal is disabled.ViewsUser viewDefault command level1: Monitor levelUsage guidelinesTo view log information, execute the terminal monitor and terminal logging commands, and then enablethe information center (enabled by default).The configuration of this command is only valid for the current connection between the terminal and thedevice. If a new connection is established, the display of log information on the terminal restores thedefault.Examples# Disable the display of log information on the current terminal. undo terminal loggingInfo: Current terminal logging is off.terminal monitorUse terminal monitor to enable the monitoring of system information on the current terminal.Use undo terminal monitor to disable the monitoring of system information on the current terminal.Syntaxterminal monitorundo terminal monitorDefaultMonitoring of the system information is enabled on the console and disabled on the monitor terminal.ViewsUser viewDefault command level1: Monitor levelUsage guidelinesConfigure the terminal monitor command before you can display the log, trap, and debug information.The undo terminal monitor command automatically disables the monitoring of log, trap, and debuginformation.The configuration of this command is only valid for the current connection between the terminal and thedevice. If a new connection is established, the monitoring of system information on the terminal restoresthe default.
