HAAS + SOHN HSP 2.17 Installation And Operating Instructions Manual
Also see for HSP 2.17: Equipment sheet
                               | |
Contents
| 
2Index of contents1. Description 32. General instructions, safety instructions 33. Installation of the pellet stove and connection tothe chimney 44.The pellet stove’s functional characteristics 65. The pellet stove’s operating statuses: 65.1. Ignition phase 65.2. Heating mode 65.3. Burner test / cleaning 75.4. Cooling down 75.5. Standby 75.6. Safety shutdown (shutdown) 75.7. Faults 75.8. Switching off – operating status OFF 85.9. Power cut 86. Description of operator console keys 86.1. Operator console 86.2. Description of the symbols 86.2.1 Display software version after power connection86.2.2 Setting the language at initial 86.3. Standard screen /welcome page 96.3..1 Room temperature display in energy savingmode 96.3..2 Setting the operating mode „On“ 96.3..3 Setting target room temperature 96.4. Main menu 96.4..1 Setting the date and time 106.4..2 Setting the language 106.4..3 Desription – Heating profile 106.4..4 Desription – Display brightness - contrastsetting 106.4..5 Software Version 116.4..6 Fault screen (top field in the display) 116.4..7 Description – Key lock (child-safe) 117. Operating the pellet stove 117.1. Fuel 117.2. Commissioning your pellet stove 128. Cleaning and maintenance work 128.1. Cleaning the surface 138.2. Cleaning the glass panel 138.3. Clean combustion chamber” function instruction 138.4. Cleaning the combustion pot -weekly 138.5. Cleaning the pellet container - annual maintenance148.6. Cleaning the flue gas passes-annual maintenance 148.7. Cleaning the induced draught housing and fan 169. Description of the components 169.1. Storage container (pellet tank) 169.2. Screw conveyor motor / screw conveyor 169.3. Combustion pot with tray: 179.4. Electric ignition 179.5. Control unit 179.6. Operator console 189.6..1 Backlighting 189.6..2 Activating the backlighting 189.7. Induced draught fan with rotation speed feedback 189.8. Flame or combustion chamber temperature sensor(combustion chamber thermosensor) 189.9. Flue gas thermosensor 189.10. Room temperature sensor 189.11. OC – Overheat cutout 199.12. Combustion chamber cladding 199.13. Flue tube connection 199.14. Mains cable and master switch 1910. Technical data 2011. Faults, causes, correction 2111.1. Error messages on the display 2111.2. General faults 2412. Type plate: Symbol 2513. Replacement parts list 2714. Circuit diagram 2815. Guarantee 30 |
Related manuals for HAAS + SOHN HSP 2.17
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine